Search found 38 matches

by Rich Tanner 36083
Fri Dec 31, 2021 8:32 am
Forum: Classifieds
Topic: Wanted to buy PDQ 36
Replies: 1
Views: 5366

Re: Wanted to buy PDQ 36

Hello
I am Rich Tanner and I own Feral Cat. It is a 2000 Capella.
If you are interested give me a call at 407 766-8405
Cheers
Rich
by Rich Tanner 36083
Sat Oct 17, 2020 10:57 am
Forum: PDQ Capella (PDQ 36) Forum
Topic: Can 2019/2020 manual tilt Yamaha 9.9s be used on a PDQ 36?
Replies: 2
Views: 7695

Re: Can 2019/2020 manual tilt Yamaha 9.9s be used on a PDQ 36?

Hello I wanted the same setup, and it is doable. I bought my Yamaha engines and wiring harness from Inflatable Boat Specialist ( inflatableboats.net) Yamaha T9.9GEXH-6AVKX-1004781... 6AVKX1006863 Remote Refit Kit Adapter Harness for powerhead Achilles HB 315 DX-ACH00129A111 Yamaha Twin Engine Key Sw...
by Rich Tanner 36083
Mon Aug 15, 2016 11:31 am
Forum: Welcome to the PDQ Forum
Topic: LRC versus Classic Specs
Replies: 4
Views: 14125

Re: LRC versus Classic Specs

Just a few notes. The LRC has the SS bow protection. It is an upgrade, that also includes bow pulpits and mast pulpits, sound deadening between the staterooms along with the skegs. I do use the "U" bolts on the bow protection strip for anchoring, but the original u bolts are not marked by ...
by Rich Tanner 36083
Sun Jan 24, 2016 1:47 pm
Forum: Classifieds
Topic: HullSurvivor - Please Help - Message from Forum Host
Replies: 8
Views: 15882

Re: HullSurvivor - Please Help - Message from Forum Host

Hi Sam

I don't need the Hull Survivor, but I would like to help. You have done good service for us PDQ'ers.
Where can I send a check to you?

Rich
PDQ 36 Feral Cat
by Rich Tanner 36083
Thu Aug 21, 2014 8:31 am
Forum: Classifieds
Topic: Underwater Camera
Replies: 2
Views: 6237

Re: Underwater Camera

It has found a happy home.
by Rich Tanner 36083
Sat Aug 09, 2014 2:56 pm
Forum: Classifieds
Topic: Underwater Camera
Replies: 2
Views: 6237

address for Underwater Camera

by Rich Tanner 36083
Sat Aug 09, 2014 2:55 pm
Forum: Classifieds
Topic: Underwater Camera
Replies: 2
Views: 6237

Underwater Camera

Hello All
I have a Sea Life L201 35mm camera that is looking for a good home. I tried it sans film and the drive and shutter work fine. This does include the waterproof case, rated to 50 meters.
Free if you pay shipping, probably $6-8.

Rich
S/V Feral Cat Hull83
by Rich Tanner 36083
Thu Feb 27, 2014 6:15 pm
Forum: Outboard Engines
Topic: Pulley for manual tilt
Replies: 4
Views: 12968

Re: Pulley for manual tilt

Hi Brian
One thing I did was move the hardware to the forward bolt on the cavitation plate. This raises the lower end a couple of inches higher than the factory location and kept them out of the water
Rich
by Rich Tanner 36083
Tue Aug 02, 2011 1:07 pm
Forum: PDQ General Forum
Topic: Inverter Charger selection
Replies: 10
Views: 13388

Re: Inverter Charger selection

Hi Marc
I have had this ProSine 2000 for 7 years, but I had a leak at the helm and it got wet ;-(
I came back to the boat after leaving it for a year and it didn't work. Minimum $90 service fee for the dealer to check it out and 100 miles of driving.
by Rich Tanner 36083
Tue Aug 02, 2011 4:31 am
Forum: PDQ General Forum
Topic: Inverter Charger selection
Replies: 10
Views: 13388

Re: Inverter Charger selection

Hi John
Thanks for the info . I had never heard of the Victron but will check it out today.
by Rich Tanner 36083
Mon Aug 01, 2011 5:45 pm
Forum: PDQ General Forum
Topic: epirb battery replacement?
Replies: 3
Views: 6603

Re: epirb battery replacement?

Hi John One of my EPIRBs was due a battery change two years ago. I was told by the factory that an authorized dealer had to do it. The one here in Florida wanted $242. I starting hunting online and found the battery for $67. Simple install and it tests fine. Mine was out of warranty so no issues the...
by Rich Tanner 36083
Mon Aug 01, 2011 5:37 pm
Forum: PDQ General Forum
Topic: Inverter Charger selection
Replies: 10
Views: 13388

Inverter Charger selection

I need to replace my Prosine 2000 inverter/charger. Xantrex is pushing the new model Freedom 3000. I am researching the Magnum 2000.
Any opinions, thoughts or suggestions? Thanks.
by Rich Tanner 36083
Thu May 26, 2011 6:12 am
Forum: PDQ Capella (PDQ 36) Forum
Topic: Dinghy/Solar pane larch
Replies: 6
Views: 10930

Re: Dinghy/Solar pane larch

Alan, one thing I didn't have done to my arch was to have large openings in the feet for cable routing.
I spent a lot of time and effort doing this once it was installed. I'd recommend that you the have the largest opening feasible put in each foot.
Rich
by Rich Tanner 36083
Wed May 25, 2011 9:35 am
Forum: PDQ Capella (PDQ 36) Forum
Topic: Dinghy/Solar pane larch
Replies: 6
Views: 10930

Re: Dinghy/Solar pane larch

Hi Alan
I use an arch for dingy and solar, antennas etc. I probably won't be at the boat until next wee #) May, but sill send them then. Sam the Skull in next to me so I'll get pics of his too.
Rich
by Rich Tanner 36083
Sat Jun 14, 2008 12:28 pm
Forum: Gear / Equipment / Maintenance
Topic: Inverter Pure Sine or MSW?
Replies: 4
Views: 7318

Re: Inverter Pure Sine or MSW?

Hi Tom I initially had a Freedom 20. It ruined a coffee pot and an electric toothbrush. Tech support said it was the control circuitry in each of them. Probably used at least 30 other tools/appliances and never had a problem. I have gone to the ProSine 2000, for the pure waveform and for the weight ...