Search found 13 matches

by island time
Sun May 06, 2018 7:13 am
Forum: PDQ Powercat Forum
Topic: FORWARD FUEL TANK LEAKING
Replies: 4
Views: 174

FORWARD FUEL TANK LEAKING

My forward fuel tank is leaking ,I spoke to Dick from Rhumbline and he told me I am probably the first one with this problem on a PDQ Powercat. He also advised me to get the tank out by cutting out the deck,I found a company that could make a fuel bladder with the proper fuel fittings that could fit...
by island time
Mon Apr 16, 2018 6:50 pm
Forum: PDQ Powercat Forum
Topic: Fuel leak
Replies: 3
Views: 413

Re: Fuel leak from forward tank

i am fairly certain that the forward fuel tank is leaking from the bottom , I have done a search on this sight and have found nothing pertaining to this, If anyone can help with info on removing this tank, it would be grately appreciated,.
by island time
Fri Mar 30, 2018 3:51 pm
Forum: PDQ Powercat Forum
Topic: Fuel leak
Replies: 3
Views: 413

Fuel leak

I have hull # 18 with the fridge /freezer built into the forward lower galley, I see diesel fuel leaking from a side compartment next to the a/c water pump under the floor in the galley. It is slowly leaking from the front of the compartment.Ive checked the generator area for leaks which could trave...
by island time
Sat Feb 17, 2018 10:10 am
Forum: PDQ Powercat Forum
Topic: Hydraulic steering
Replies: 1
Views: 256

Hydraulic steering

I just replaced the starboard side hydraulic steering ram on my boat and am having trouble bleeding the system. Any help would be greatly appreciated.
by island time
Sat Oct 28, 2017 7:36 am
Forum: PDQ Powercat Forum
Topic: Rear sliding door
Replies: 8
Views: 839

Re: Rear sliding door

Parts are available for rear sliding door from Aluminum 2000 Inc, 595 E.Oregon Road, Lititz PA.17543, 717-569-2300. They were very helpful and prompt service.
by island time
Sun Oct 08, 2017 6:40 am
Forum: PDQ Powercat Forum
Topic: Rear sliding door
Replies: 8
Views: 839

Rear sliding door

Does anyone have any contact information on purchasing hardware for sliding door, The rollers on my door seem to be getting worn out. Any info would be appreciated
by island time
Thu Sep 14, 2017 7:49 am
Forum: PDQ Powercat Forum
Topic: Irma
Replies: 17
Views: 2260

Re: Irma

We are located in Cape Coral , Florida and keep Island Time in a canal behind our house, We were extremely lucky, Not a scratch on the boat although we did prepare her for this, There was a lot more damage to the east of us where the eye went through, Hope everyone was as fortunate as us.
by island time
Sun Mar 05, 2017 7:07 am
Forum: PDQ Powercat Forum
Topic: Thru Hull Transducer
Replies: 9
Views: 1545

Thru Hull Transducer

Where would be a good location for a thru hull transducer, Is there a void under the storage compartments in the hulls or is that the bottom of the hull
by island time
Sun Mar 05, 2017 7:00 am
Forum: PDQ Powercat Forum
Topic: Propeller removal
Replies: 3
Views: 900

Re: Propeller removal

Save your self the headaches, I use Amphibian Dive Service, Tom the owner is very professional and very resonable, 239-410-5512
by island time
Sun Jan 22, 2017 6:15 pm
Forum: PDQ Powercat Forum
Topic: transfer pump
Replies: 7
Views: 1466

transfer pump

I would like some info on the transfer pump for transferring fuel from the front tank to the aft tank, when i do this , I here the pump running but i do not see results. I looked on the pump, but i do not see a gallons per hour decal.I have read on the forum about the pump being possibly air locked ...
by island time
Thu Sep 29, 2016 6:17 am
Forum: PDQ Powercat Forum
Topic: cruise speed
Replies: 6
Views: 1479

cruise speed

I would like to here from other owners with the 75 hp yanmars as to what is your cruise speed, not top speed, at what rpm do you achieve this and the size of your props. Diameter , pitch and 3 or 4 blade. i would also be interested in hearing the same information from owners with the 100 and 110 hp ...
by island time
Sat May 28, 2016 6:20 am
Forum: PDQ Powercat Forum
Topic: question on props
Replies: 13
Views: 2492

Re: question on props

Sorry, i meant to write 16x13 on the 4 bladed props
by island time
Fri May 27, 2016 6:35 am
Forum: PDQ Powercat Forum
Topic: question on props
Replies: 13
Views: 2492

question on props

WE JUST PURCHASED A 2002 PDQ 34 ' Island Time in january,love the boat, the boat came with 4 bladed props 16x11 and a half, with these props , I could not achieve a cruise speed of 11-13 knots. I took the original 3 blade props which came with the boat,16x13,had them reconditioned and installed them...

Go to advanced search