Search found 54 matches

by AlanH
Sat Jun 02, 2018 10:11 am
Forum: PDQ Powercat Forum
Topic: OVEN ALTERNATIVE
Replies: 11
Views: 460

Re: OVEN ALTERNATIVE

We have had our 2006 for 2.5 years and it had a 1.5 cubic foot LG convection oven when we got it. I believe it is original to the boat. I can't find a printing date on the owners manual but it the warranty does say it is a warranty for LG Canada. To the best of my knowledge the boat left Canada when...
by AlanH
Mon May 14, 2018 5:01 pm
Forum: PDQ Powercat Forum
Topic: Rear sliding door
Replies: 8
Views: 966

Re: Rear sliding door

Thanks, that was very helpful. I thought we were the type B doors, this confirms it.
by AlanH
Mon May 14, 2018 2:02 pm
Forum: PDQ Powercat Forum
Topic: Rear sliding door
Replies: 8
Views: 966

Re: Rear sliding door

After another discussion with the door manufacturer, it looks like we either have the A or B doors. Does anyone know which we have?

Thanks,
Alan
by AlanH
Mon May 14, 2018 11:07 am
Forum: PDQ Powercat Forum
Topic: Rear sliding door
Replies: 8
Views: 966

Re: Rear sliding door

Does anyone have the part number for the sliding door? I contacted the folks at the number above and they said the best thing would be for me to get a part number from someone that has replaced the rollers.

Thanks,
Alan
by AlanH
Wed Apr 11, 2018 1:30 pm
Forum: PDQ Powercat Forum
Topic: Raymarine Electronics Available
Replies: 5
Views: 539

Re: Raymarine Electronics Available

Phil,

I am sorry but I have committed to giving everything to James Power. He is picking it up tomorrow.

Alan
by AlanH
Mon Apr 09, 2018 10:29 am
Forum: PDQ Powercat Forum
Topic: Raymarine Electronics Available
Replies: 5
Views: 539

Re: Raymarine Electronics Available

James,

I haven't heard from anyone else so you are more then welcome to all of it, I will send you an email.

Alan
by AlanH
Sat Apr 07, 2018 1:33 pm
Forum: PDQ Powercat Forum
Topic: Raymarine Electronics Available
Replies: 5
Views: 539

Raymarine Electronics Available

Hi All, We are just about done with the installation of a full new suite of Raymarine Electronics. All of the old stuff has been removed and I would be happy to give any or all of it to anyone who would like it. There are two E80 Chartplotters, 18" Radar, Autopilot and a remote Autopilot. Every...
by AlanH
Sun Feb 18, 2018 5:41 pm
Forum: PDQ Powercat Forum
Topic: Propeller Shaft Size
Replies: 2
Views: 377

Re: Propeller Shaft Size

Thank Mac.
by AlanH
Sun Feb 18, 2018 2:43 pm
Forum: PDQ Powercat Forum
Topic: Propeller Shaft Size
Replies: 2
Views: 377

Propeller Shaft Size

One simple question, are the propeller shaft's on our boats 1.25 inches or a metric number?

Thanks,
by AlanH
Sun Feb 18, 2018 10:55 am
Forum: PDQ Powercat Forum
Topic: Life Line Replacement
Replies: 9
Views: 1119

Re: Life Line Replacement

Thanks Russ. We did not have any broken strands at all. I will wait about 6 months and update on any rust problems that might occur.
by AlanH
Sat Feb 17, 2018 12:14 pm
Forum: PDQ Powercat Forum
Topic: Life Line Replacement
Replies: 9
Views: 1119

Re: Life Line Replacement

At the January PDQ Rendezvous in Stuart, Dick Tuschick covered a renewal process for lifelines. Strip the old white plastic covering off and soak the lines in Ospho overnight. They come out looking like brand new stainless lines. I just did Catbo and they came out great. A few things I learned if an...
by AlanH
Mon Feb 05, 2018 5:58 pm
Forum: PDQ Powercat Forum
Topic: Maitenance check?
Replies: 6
Views: 586

Re: Maitenance check?

My bilge pumps are glued in.
by AlanH
Tue Dec 12, 2017 10:39 am
Forum: PDQ Powercat Forum
Topic: Fresh Water water flow PDQ 34
Replies: 10
Views: 987

Re: Fresh Water water flow PDQ 34

We had problems with calcium like minerals also. Our boat has a access plate on top of the water tank. When I removed it you could see the mineral chunks on the bottom of the tank. There was still several inches of water in the tank so I used a hose and syphoned water and minerals out of the tank. I...
by AlanH
Wed Nov 08, 2017 2:14 pm
Forum: PDQ Powercat Forum
Topic: Midship Cleat Line Chock
Replies: 2
Views: 589

Re: Midship Cleat Line Chock

James, Thank you for the information. I called Metaux Produit and they do have the drawings. I placed an order for two at $117 each plus shipping and any import fees. They are scheduled for production in January. If anyone else needs these and they don't speak French ask for Sabastian. I have not st...
by AlanH
Tue Nov 07, 2017 1:19 pm
Forum: PDQ Powercat Forum
Topic: Midship Cleat Line Chock
Replies: 2
Views: 589

Midship Cleat Line Chock

I am planning to add a second midship cleat and would like to add a second chock for the line. Of course it would be nice if I could find a matching chock and cleat. Does anyone have a source for both. Most important is the chock. I have searched the web and have not found one that looks like it. Th...

Go to advanced search