Search found 36 matches
- Wed May 08, 2024 3:29 pm
- Forum: PDQ Powercat Forum
- Topic: Hull Parts, Bow Cap and Spray Deflector
- Replies: 7
- Views: 2782
Re: Hull Parts, Bow Cap and Spray Deflector
I found the easiest way for me to repair the caps was to fill in the gaps with 5200 and tape off area when dry. Then I glassed the whole piece while in place and sanded the area smooth. I then used a liquid rubber paint and put several coats on and it came out looking brand new. I then cleaned all t...
- Sun Jan 07, 2024 12:04 am
- Forum: PDQ Powercat Forum
- Topic: splash guards and vinyl padding protector on outside stairwells
- Replies: 4
- Views: 2289
Re: splash guards and vinyl padding protector on outside stairwells
thanks john! I probably should of just asked you first.
Kip
Kip
- Sat Jan 06, 2024 12:37 pm
- Forum: PDQ Powercat Forum
- Topic: splash guards and vinyl padding protector on outside stairwells
- Replies: 4
- Views: 2289
Re: splash guards and vinyl padding protector on outside stairwells
I have been unsuccessful in locating the thread...I will check with Dick and hopefully he might know. thanks.
Kip
Kip
- Fri Jan 05, 2024 5:57 pm
- Forum: PDQ Powercat Forum
- Topic: splash guards and vinyl padding protector on outside stairwells
- Replies: 4
- Views: 2289
splash guards and vinyl padding protector on outside stairwells
I guess I will start with the splash rails down at the waterline at the bow of the boat. I don't know the correct name or where to find these as mine need to be replaced as well as the rubber guards along side the outside stairs. If anyone can help steer me in the right direction to get these items ...
- Fri Oct 14, 2022 7:13 pm
- Forum: PDQ Powercat Forum
- Topic: hand rail repair
- Replies: 2
- Views: 974
hand rail repair
looking for information on how to remove the port side bow hand rail as it was damaged during the storm.....it appears to have seems but i am not sure how it was assembled and hopefully don't have to remove the whole forward rail to get it fixed as a new support bar needs to be welded and potentiall...
- Fri May 27, 2022 6:13 pm
- Forum: PDQ Powercat Forum
- Topic: vessel AC's
- Replies: 0
- Views: 7214
vessel AC's
just a reminder to my fellow pdq owners to flush your ac's as it is getting hot now and their use will be increasing....
- Mon Apr 25, 2022 8:25 pm
- Forum: PDQ Powercat Forum
- Topic: Lightweight Dinghy
- Replies: 13
- Views: 5020
Re: Lightweight Dinghy
you will find that 9.9 to run very well and will run great for years and you can't beat the weight to power issue.....Dont be afraid of 2 strokes as the good ones are very reliable and powerful
- Mon Apr 25, 2022 2:46 pm
- Forum: PDQ Powercat Forum
- Topic: tach guages
- Replies: 8
- Views: 2995
tach guages
where does the 100 yanmars take the rpm readings from as mine isn't working and I am assuming i moved a wire or 2 doing work on the port motor and now the gauge doesn't work.
Thanks
Thanks
- Mon Apr 25, 2022 2:42 pm
- Forum: PDQ Powercat Forum
- Topic: Yanmar 75hp and 100hp exhaust elbow
- Replies: 16
- Views: 12762
Re: Yanmar 75hp and 100hp exhaust elbow
HDI marine is a much heavier better built elbow than the original and it ran about 300.00 and fit perfectly but the spacer plate was not easy to deal with as a screw broke off in it and it had to be machined out as there are no replacements out there that i could find. I don't suggest trying to take...
- Mon Dec 20, 2021 3:42 pm
- Forum: PDQ Powercat Forum
- Topic: Propeller size for the 100 hp engines.
- Replies: 28
- Views: 21577
Re: Propeller size for the 100 hp engines.
Duane, can you give me a quick run down on cleaning the turbo and at what rpm do you run the motor while you do this?
thanks
Kip
thanks
Kip
- Mon Dec 20, 2021 3:31 pm
- Forum: PDQ Powercat Forum
- Topic: Servicing Rudder Posts
- Replies: 13
- Views: 5712
Re: Servicing Rudder Posts
im glad someone brought this up.....my port side is leaking but of course the water heater is quite the obstacle to get around so I am wondering for those who did adjust or repack the gland did you remove the water heater? I was able to do the prop shaft packing while the boat was in the water with ...
- Sun Mar 07, 2021 1:38 pm
- Forum: PDQ Powercat Forum
- Topic: Hydraulic Ruder Aligbment
- Replies: 8
- Views: 7854
Re: Hydraulic Ruder Aligbment
in our vessel the alignment tends to be needed after rough water passage and/or maybe extended use of the autopilot. I do keep a spare arm on board just in case but the wife and i check it every time we depart from anywhere because it seems to go out at the most in opportune time. Ours doesn't get r...
- Sun Mar 07, 2021 1:27 pm
- Forum: PDQ Powercat Forum
- Topic: Dinghy Hoist
- Replies: 20
- Views: 13643
Re: Dinghy Hoist
i had upgraded my dinghy while trying to find a more powerful motor on my 9ft west marine and ended up with too good a deal by getting a fiberglass bottom with a 9.8 2stroke. the dinghy was a 10 footer which initially was a issue but with some measurements i costumed 2 strong eye hooks properly spac...
- Mon Aug 17, 2020 10:50 pm
- Forum: PDQ Powercat Forum
- Topic: Nova Kool Refrigerator
- Replies: 41
- Views: 24824
Re: Nova Kool Refrigerator
i agree with duetto as i have the old style kitchen set up and it appears i would have to cut something to get that thing out. Our fridge needs to be replaced but i would also like to go with another brand. We get buy on portable electric coolers that drawl very little amps. I think I would Sawzall ...
- Fri May 29, 2020 2:01 pm
- Forum: PDQ Powercat Forum
- Topic: places to stay in the FL keys?
- Replies: 6
- Views: 6492
Re: places to stay in the FL keys?
thats great info as we don't mind being on the hook as long as we can dingy over. most of the winds lately seem to be coming out of the east so i guess the west side probably will work out better.....if these anchorages are on my chart plotter i should be able to locate them. I figured you have been...