Search found 73 matches
- Thu Dec 11, 2014 9:34 am
- Forum: PDQ Powercat Forum
- Topic: Northern Lights exhaust elbow
- Replies: 4
- Views: 6622
Re: Northern Lights exhaust elbow
Hey Dick, I've been through the generator exhaust elbow rupture. if it happens to anybody, be sure to get a reputable rebuilder for generator. Mine was completely rebuilt, got to Bahamas, and it quit generating after 25 hrs. My work was done at Marine Pro of Central Florida. Engine runs fine for wha...
- Thu Nov 27, 2014 10:58 am
- Forum: PDQ Powercat Forum
- Topic: Nova Kool refrigerators
- Replies: 3
- Views: 6548
Re: Nava Kool refrigerators
Hey John, I did the fan a couple of years ago, and have the fan blowing out. I used a strip of foam insulation down the side so the fan would blow up, not to the door. It sure does help the fridge cool quicker. Not going to say I haven't had any more problems, might jinx the fix. Roger on Teamwork
- Mon Sep 22, 2014 12:31 pm
- Forum: PDQ Powercat Forum
- Topic: A/C raw water strainer
- Replies: 2
- Views: 4695
Re: A/C raw water strainer
Thanks James,found nothing there, I cant find the fine mesh filter screen. Lots of SS, but they don't last.
- Fri Sep 19, 2014 4:47 pm
- Forum: PDQ Powercat Forum
- Topic: A/C raw water strainer
- Replies: 2
- Views: 4695
A/C raw water strainer
I can't locate the blue fine mesh strainers that came on my PDQ. The stainless are worthless in salt water. the large mesh are available at West Marine, there white. Any help would be greatly appreciated. Thanks, Roger on Teamwork
- Sun Aug 17, 2014 7:53 am
- Forum: PDQ Powercat Forum
- Topic: Northern Lights Generator
- Replies: 4
- Views: 6510
Re: Northern Lights Generator
Hey George, yes, it's the wet exhaust elbow # 10 in schematic.
- Tue Aug 05, 2014 12:37 pm
- Forum: PDQ Powercat Forum
- Topic: Windlass Relay
- Replies: 5
- Views: 8063
Re: Windlass Relay
Hey Larry, I had that problem a year or so ago, turned out to be low voltage. charge up your house batteries before buying parts. My battery bank and charger were a little bit to small. fixed with !00 amp charger and 4 AGM batteries. Roger on Teamwork
- Sun Aug 03, 2014 2:58 pm
- Forum: PDQ Powercat Forum
- Topic: Northern Lights Generator
- Replies: 4
- Views: 6510
Re: Northern Lights Generator
There is a stainless elbow available, has been a long time. Teamwork
- Wed Jul 30, 2014 1:21 pm
- Forum: PDQ Powercat Forum
- Topic: Northern Lights Generator
- Replies: 4
- Views: 6510
Northern Lights Generator
You guys and gals that have the Northern Lights generator, check the exhaust elbow NOW, its welded cast and when it fails you will ruin the generator. I sucked salt water into engine, caught it in time to be able to repair. these things happen at 3:00 AM in Fl.!!!!! New Gen, alm0st $9000.00.
- Wed Jul 30, 2014 1:13 pm
- Forum: PDQ Powercat Forum
- Topic: Storage around lower helm seat
- Replies: 14
- Views: 11090
Re: Storage around lower helm seat
Hey Gusto, Teamwork would like to have pix also. rogercomer487@gmail.com Thanks..
- Mon Jul 07, 2014 2:17 pm
- Forum: PDQ Powercat Forum
- Topic: 16000 BTU AC
- Replies: 0
- Views: 5858
16000 BTU AC
I have a SS pan for forward AC, and a blower motor, both in good condition. blower motor is discontinued, to replace is $600.00 plus labor, SS pan 3 years old. My compressor gave up, decided to go new. Cruisair 16000 BTU AC/ heat. Both for $250.00 plus shipping from Satellite Beach Fl. Roger on Team...
- Thu Jun 05, 2014 3:36 pm
- Forum: PDQ Powercat Forum
- Topic: Master stateroom
- Replies: 5
- Views: 7996
Re: Master stateroom
Hey Jimmy, my mattress is 8-9 inches, least expensive of the queens, no pillow top. it is about the same as factory bed plus a 3 " topper.Roger on Teamwork
- Thu May 29, 2014 9:06 am
- Forum: PDQ Powercat Forum
- Topic: Master stateroom
- Replies: 5
- Views: 7996
Re: Master stateroom
I deflated at store, didn't think about lifting, it is light, and I will give that a try. You can get one single bladder in the queen now, fairly new, works well. Roger
- Wed May 28, 2014 9:13 am
- Forum: PDQ Powercat Forum
- Topic: Master stateroom
- Replies: 5
- Views: 7996
Master stateroom
I have been struggling to be really comfortable in the stateroom bed, memory foam toppers, (not bad) different mattress covers, etc. the biggest problem was being able to fold the mattress back for access to engine.. I went to the Select Comfort store, and asked the salesman to deflate the queen siz...