PDQ OWNERS FORUM

I've been using Amsoil 15-40 full synthetic oil for years.
I'm very satisfied, and with testing you can go to 300 hrs.
Change oil filter every 100 hrs.
Roger on Teamwork 100 hp hull 65
Going 300 hrs.lessens the cost of an oil change.
Generator also. Roger on Teamwork

Inside the boat, has screws, which I think hold the window in. Want to remove it to get the powder coat repaired. Thanks

Can the ring around the inside of the windows be removed and replaced without breaking the seal on outside part of the window? Roger on Teamwork

Can the ring around the inside of the windows be removed and replaced without breaking the seal on outside part of the window? Roger on Teamwork

I think there is already enough heat in there when generator is running, I'm going to rope locker.

Starboard stateroom leak was caused by sliding door assembly that wasn't caulked from factory. I caulked several times, but the torquing of the boat kept separating seal. Fix was to use Flex Seal tape on top of door assembly. Been dry for 3 years.
Roger on Teamwork

During a recent corrosion survey, it was discovered that there is 60 ohms of resistance between the AC grounding buses and the Main DC negative bus in my electrical panel. The ABYC electrician conducting the survey explained that these two buses should be electrically connected with less than one oh...

Teamwork installed a new water pump annually until I started filtering all water going into tank. Whole house charcoal filter from Lowe’s $34-40 . I haven’t changed a pump in 6 years. Still keep a spare, usually sell to someone that doesn’t filter their water. Welcome to the PDQ world, lots of help ...

What manufacturers would you suggest? Lots on Amazon, all household.
Would like to know where you placed them. CO sinks, smoke rises??
Roger on Teamwork

When checking oil levels, the dipstick shows different levels on each side.
Is there a secret to it? I've emailed Yanmar, talked to Yanmar mechanics, no answers from either.
Teamwork

Does any one have a source for the plastic latches on the portholes?

thanks Duane, easy when you find the bolts. LOL

what is the trick to remove raw water pump? two bolts easy, other two are threaded, maybe bolted from the inside???? Help please Roger on Teamwork

The width from outside to outside window flange, is 36 3/16" roger on Teamwork 2005 hull #65

Sounds like the center of a hole, sawed with a hole saw.

Roger on Teamwork