Search found 1112 matches
- Thu Feb 20, 2020 11:37 pm
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Genoa and Assymetrical only speeds and handling
- Replies: 9
- Views: 18163
Re: Genoa and Assymetrical only speeds and handling
Furling a genoa in 15-20 knots with no main is probably more vigorous than hoisting a reefed main and some jib. Certain, damamge is more likely. Same with a chute. If it's just for drifting in light air, then OK. But then you'll want the main if you want to sail past walking speed. I've sailed main ...
- Mon Feb 17, 2020 5:40 pm
- Forum: PDQ Powercat Forum
- Topic: Got a CPAP Aboard?
- Replies: 5
- Views: 7054
Re: Got a CPAP Aboard?
Rather than struggle with locating a shelf near the head of the bed, we strung extra hoses together to make a longer hose, which we then looped along the edge of the ceiling. Worked very well. This allowed us to leave the CPAP safely back on the night stand. I recall the hose was 3x4'=12'. It did no...
- Mon Feb 17, 2020 1:13 pm
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Genoa and Assymetrical only speeds and handling
- Replies: 9
- Views: 18163
Re: Genoa and Assymetrical only speeds and handling
I suppose I've always been something of a sail trim maven. I like to to feel the boat move to perfection. I suppose that is why I tweaked the sail plan and underbody. Unless you are trying to sail with the AW aft of 120 degrees, the main should actually help the chute fill, by keeping the flow attac...
- Sat Feb 01, 2020 7:36 am
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Genoa and Assymetrical only speeds and handling
- Replies: 9
- Views: 18163
Re: Genoa and Assymetrical only speeds and handling
There is quite a bit of PDQ 32 trim stuff on my blog. Genoa Upwind.You are not going to be able to point to windward with more than ~ 120% genoa. This is because you need to sheet up against the hard top, which means rolling up some genoa. With a 180, the sail shape with probably be horrible after r...
- Fri Jan 31, 2020 10:55 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Corroded holding tank access plate
- Replies: 6
- Views: 15343
Re: Corroded holding tank access plate
I'm glad the Re-Move worked out. I enjoy testing things so that we can all benefit. Many products say they will remove polyurethane cauk=lk, but only Re-Move really does.
- Wed Jan 22, 2020 12:23 pm
- Forum: PDQ General Forum
- Topic: original construction materials
- Replies: 3
- Views: 14745
Re: original construction materials
My boat had both balsa and foam core. One transom was balsa, the other foam. Decks foam, bulkheads a mix of foam and balsa. All of it was very solid, though, with no bad spots.
- Tue Jan 21, 2020 9:13 am
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: New Owner - Bulb Part #'s
- Replies: 7
- Views: 15259
Re: New Owner - Bulb Part #'s
Just a few thoughts. * 15 hp. No you will not get more power and you will get less in reverse. The Yamaha 9.9 really is the right motor. I've used other motors and they just aren't as good. * Solar is much more effective than engine charging when you have a big hardtop. You don't run enough engine h...
- Sat Dec 14, 2019 7:57 pm
- Forum: PDQ Powercat Forum
- Topic: Deck Storage
- Replies: 14
- Views: 17538
Re: Deck Storage
Modify a bike rack. You can also buy them for rails. http://sail-delmarva.blogspot.com/2010/07/how-to-carry-bicycles-without-origami.html http://3.bp.blogspot.com/_fDLXryKUnCE/TEIPBLsqXaI/AAAAAAAAAkw/phGSaOUVyCQ/s1600/Bike+Rack.jpg Kayaks can go on top of the davits (they were low on my PDQ 32). Oth...
- Sun Dec 08, 2019 8:41 am
- Forum: PDQ Powercat Forum
- Topic: Fuel Pick up tube problem
- Replies: 31
- Views: 34722
Re: Fuel Pick up tube problem
Was it a genuine Parker/Raycor element? They should NEVER distort under vacuum, and I have changed many hundreds in industry, many of which were tragically dirty and high vacuum. If it deformed, dirt got past it. If the injector pump is bad, that may be the reason. There should be a filter on the en...
- Sat Nov 30, 2019 11:12 pm
- Forum: PDQ Powercat Forum
- Topic: Boat Yoga
- Replies: 3
- Views: 5124
Re: Boat Yoga
I always found that padding all of the hard spots with multiple towels made boat yoga go a lot better. You think "it will just be a moment," and then some bulkhead or bump tries to cut you in half. Take the extra time to plan.
- Sat Nov 30, 2019 11:06 pm
- Forum: PDQ Altair (PDQ 32) Forum
- Topic: Winterizing Water System
- Replies: 3
- Views: 11622
Re: Winterizing Water System
Shop vac, or if your forearms are slim, you can bail it out with a cut-down soda bottle within 10 minutes. No, 1/2-inch won't matter. 2 inches, I'm not so sure, so I always emptied it. I always liked to give it a good slosh around, a light scrub, and then vac it dry. Leave the port open, it would dr...
- Sun Oct 06, 2019 6:50 pm
- Forum: PDQ General Forum
- Topic: Dingy motor hoist
- Replies: 7
- Views: 16736
Re: Dingy motor hoist
I've always been of the opinion that if I have to take the motor off, the motor is too big or the davits need improved. Not worth the trouble to take the motor off, no way. The boat works for me, not me for the boat. You might consider tricing the dinghy, with lines under it to help support the weig...
- Tue Oct 01, 2019 3:20 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: PDQ 36 Capsize
- Replies: 4
- Views: 13592
Re: PDQ 36 Capsize
Take it easy. First, in my very next post I said that I did not have much PDQ 36 experience and that I accepted that he said about the PDQ 36 in its entirety. I did not question any statement he made. So that issue is done. I'm not looking for a fight. As for the PDQ 32, I sailed one for a long time...
- Fri Sep 20, 2019 6:00 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: PDQ 36 Capsize
- Replies: 4
- Views: 13592
PDQ 36 Capsize
I'm assuming most of you saw this thread: http://www.cruisersforum.com/forums/showthread.php?p=2980865#post2980865 It starts stupid, but post 50 gives good information. The take away is to drop all sail when you see black clouds. Trying to sail through squalls is just a fools game based on too many ...
- Tue Sep 17, 2019 6:17 pm
- Forum: PDQ Capella (PDQ 36) Forum
- Topic: Corroded holding tank access plate
- Replies: 6
- Views: 15343
Re: Corroded holding tank access plate
They probably used 3M 5200 or a similar polyurethane. Try Re-Move / DSR5. Apply, slit along, the seam, recoat, and wait. I would try this before cutting. Uniseal ( https://www.usplastic.com/catalog/item.aspx?itemid=89951 is the one I am familiar with. But I would try Re-Move first. If you replace th...