Newbie rigging and question

Information for first time users - registration, posting pictures, testing, suggestions, etc.
catalacmarc
1st mate
1st mate
Posts: 26
Joined: Tue Aug 16, 2016 12:58 am

Newbie rigging and question

Postby catalacmarc » Wed Aug 17, 2016 8:07 pm

Hi, am in the process of buying a 1991 PDQ (outboard model) "Honu" ex-"Frolic", ex-"Zephyr". I have scanned the board here and picked up some good information. Very few issues with the boat, not the best maintained outboards but recoverable (I hope), blisters towards the bottom of the sides of the starboard keel(not the port), and finally evidence of some water intrusion through the baby-stay fitting. No structural damage that I have seen. My question is generated by the observation that the heads of the bolts through the short chainplate are not lying flat on the chainplate. The chainplate seems to have been displaced slightly upwards. Given the short length of the chain plate and the tension on the stay, I think that it has been kept slightly over tightened. Generally, my understanding is that baby stays ought to be kept hand tight to dampen mast pumping but I don't know what the expectation is for PDQs.The short length of the chain plate leads me to believe that is true for PDQs as well. Any suggestions regarding tuning the baby stay would be appreciated.
Marc

Return to “Welcome to the PDQ Forum”

Who is online

Users browsing this forum: No registered users and 3 guests