PDQ 32 hatch type

Post here if you want to discuss a topic specific to the PDQ Altair.
Post Reply
Iriemon
skipper
skipper
Posts: 77
Joined: Mon Apr 20, 2015 11:05 am

PDQ 32 hatch type

by Iriemon » Tue May 10, 2016 12:53 pm

I had a guest over tighten a riser arm on one of the bridge deck cabin hatches (above the salon table) and busted it. I believe it is a Bomar hatch, but does anyone know the exact type of hatch it is so I can get a replacement riser arm?

I looks like item A in the photo here: https://www.pompanette.com/BigSummit/po ... 65DAE?Open

I guess the old fashioned knob types were too reliable so they had to replacement them with weak-assed the twist locks.

danhaun
1st mate
1st mate
Posts: 49
Joined: Wed Jun 22, 2011 6:58 am
Location: (32011)

Re: PDQ 32 hatch type

by danhaun » Mon May 23, 2016 6:59 am

On TomKat there is a label on the inside of the hatch That reads BOMAR with a number beneath. I believe it is the model number (e.g. 95005654 in our case).

I hope that this helps.

Dan

Iriemon
skipper
skipper
Posts: 77
Joined: Mon Apr 20, 2015 11:05 am

Re: PDQ 32 hatch type

by Iriemon » Wed May 25, 2016 8:58 am

Thanks so much Dan.

I'll check that number with Bomar and post the results. I've ordered a riser arm but I'm not sure it's the right one. I'll post my findings for future reference.

Post Reply