Page 1 of 1

Salon hatch inner trim piece.

Posted: Sun Aug 06, 2017 4:15 pm
by amytom
Anyone have a source for the salon hatch inside trim piece?

Re: Salon hatch inner trim piece.

Posted: Wed Aug 09, 2017 9:33 am
by amytom
Nobody knows where to get these?

What are the chances of repair? The plastic is dried out and cracking. I'm fairly good with FRP but plastic repair would be a new skill to learn.

Any thoughts?

Re: Salon hatch inner trim piece.

Posted: Thu Aug 10, 2017 8:46 am
by Iriemon
I assume you've checked with Bomar?

If there is no source for these, the best alternative might be to make a frame out of teak.

Re: Salon hatch inner trim piece.

Posted: Thu Aug 10, 2017 9:34 am
by Lady of the Lake
Tom, send me the measurements and let me see if I have an extra one in my parts stash :-)

Re: Salon hatch inner trim piece.

Posted: Thu Aug 10, 2017 10:08 am
by thinwater
... If there is no source, the simplest, most OEM-like solution would be to pop a female mold from a bad one and make several. Faster and more appropriate to the look of the boat than teak IMHO. Cheaper too.

I might add a little flare to the outside to get them out of the mold easier. Sand the old one smooth and wax at least 3 coats to get rid of as much texture as possible.

Re: Salon hatch inner trim piece.

Posted: Thu Aug 10, 2017 1:24 pm
by Nautica
Bought mine here:

Paid about $60/ea as I recall. Be careful to get the correct depth. I also recall having to wait about 4 weeks for delivery.

Good Luck.

Pompanette LLC.

P.O. Box 1200
Charlestown, NH, USA 03603

T: (603) 826-5791
F: (603) 826-4125
http://pompanettellc.com/bomar/

Lastly, maybe check with Defender.com as they have a sizable inventory and maybe (often) less expensive.

(Here's a start: Double check with your specific hatch model number) : http://www.defender.com/product.jsp?pat ... &id=109949

Re: Salon hatch inner trim piece.

Posted: Sun Aug 13, 2017 3:56 pm
by amytom
I've contacted Bomar waiting on a reply. Hopefully they will be able to help out.

The trim pieces are 16 1/2 x 16 3/8 inside and 19 3/8 x 19 5/16.

Sam if you have any laying around that would be great.

Re: Salon hatch inner trim piece.

Posted: Mon Aug 14, 2017 7:49 am
by Lady of the Lake
Sorry Tom looks like all exterior pieces, no interior trim :-(

Sam

Re: Salon hatch inner trim piece.

Posted: Tue Aug 15, 2017 8:47 am
by amytom
Thanks anyways Sam.

Bomar got back with me.
Looks like the hatches are model# N1070-10A
And the trim ring is model # NT2070-OFF-W assumming it only goes one inch up to meet the hatch. They have a different one for taller set ups.

Of course, this is the one measurement I didn't make while on board. Oh well, will measure when I get back in town then order.

Thx.

Re: Salon hatch inner trim piece.

Posted: Tue Jan 02, 2018 12:11 pm
by amytom
Just an update on this. The standard off-white model isn't tall enough. The part number to order is NT2070-2.25-W. That is 2 1/4 inches tall but is straight white, close enough.
Careful on pricing though; I was quoted $58.00 each plus s/h. They shipped in two boxes and charged me another $53.74 + tax for the shipping.


Looks good though.

Re: Salon hatch inner trim piece.

Posted: Tue Jan 16, 2018 1:28 pm
by Iriemon
Thanks for posting that Tom, that is useful information. My trim rings are showing cracks and signs of age and I may be replacing them soon.