Trampoline idea

Post here if you want to discuss a topic specific to the PDQ Altair.
amytom
admiral
admiral
Posts: 686
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Trampoline idea

Postby amytom » Wed May 02, 2018 8:01 pm

Almost time to renew my trampoline again. Wanted to get opinions on changing the layout for my 32.
Currently have the two piece tramps that have a bolt rope on two sides and are laced to the front beam and to each other. That leaves a bit of a gap right down the center. Has anyone tried a one peice tramp laced to the front and both sides white a bolt rope on the aft end?

Any thoughts on weather or not it’s a good idea?

Tom

User avatar
thinwater
admiral
admiral
Posts: 1036
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: Trampoline idea

Postby thinwater » Fri May 04, 2018 12:28 pm

If the gap is a problem, have them make a narrow strip with grommets and lace it in the gap, using the center lacing (it can be much lighter material). This common practice on some designs, including the Stiletto 27. I think this is the simpler and safer solution. I don't like having lacing where I might step, and the edges are more of a problem that way.

Yup, I've lost a few things through the laces.
Writing full time since 2014.

http://sail-delmarva.blogspot.com/2017/ ... store.html
"Keeping a Cruising Boat for Peanuts"
"Singlehanded Sailing for the Coastal Sailor"
"Faster Cruising for the Coastal Sailor"

Iriemon
skipper
skipper
Posts: 64
Joined: Mon Apr 20, 2015 11:05 am

Re: Trampoline idea

Postby Iriemon » Fri May 04, 2018 4:05 pm

On an Island Spirit cat I had, the tramp was laced into mainsail slides that went into what were essentially mast tracks bolted on. I don't know if that would work on the 32.


Return to “PDQ Altair (PDQ 32) Forum”

Who is online

Users browsing this forum: No registered users and 1 guest