New Owner - Bulb Part #'s

Post here if you want to discuss a topic specific to the PDQ Altair.
Post Reply
Medicmatt
deckhand
deckhand
Posts: 17
Joined: Thu Oct 31, 2019 1:48 pm

New Owner - Bulb Part #'s

Post by Medicmatt »

Hello!

My wife and I just purchased a PDQ 32, 2001, Hull #48. Formerly "knotty cat", and formerly "2 Katies". We are very excited about the upcoming launch, and working on getting her ship shape. We are replacing all the bulbs w/ LED's. As I want to save a trip up the mast this winter, does anyone know the bulb # or model of typical tricolor, anchor, steaming, and deck lights on our boats?

Also, is the Yamaha 9.9 High thrust still the best replacement engine? Do the hondas with the BRP technology come close?

Cheers!

Matt & Diana Libby
2001 PDQ 32 Hull #48
Takmoh
Gloucester, MA
User avatar
Serenity
1st mate
1st mate
Posts: 25
Joined: Mon May 01, 2017 1:51 pm

Re: New Owner - Bulb Part #'s

Post by Serenity »

Matt & Diana:

Congrats on your purchase, and welcome to the party that is PDQ ownership! We met Tim and "2 Katies" at Cuttyhunk once. Hope the boat enables some fun adventures.

Unfortunately I can't answer your questions due to lack of experience with both light & engine replacement. However, I am very interested in what people have to say about replacement outboard options. When the time comes I am tempted to go with 15hp outboards with power lift, assuming they are the same size/weight as the 9.9s (often it is just a small difference in the carburetor).

-Dennis (& Aurora) on Serenity
Serenity 1998 PDQ32 #34
Portsmouth, RI
http://www.sailingserenitysquared.com
Medicmatt
deckhand
deckhand
Posts: 17
Joined: Thu Oct 31, 2019 1:48 pm

Re: New Owner - Bulb Part #'s

Post by Medicmatt »

Dennis,

Thanks for the reply.

I was looking at the 15hp models too, and they seem like they would fit in the wells. What I am unsure of, is if the increase in HP overcomes the decrease in torque at low end.... These 15hp also offer better charging solutions. We have a cuttyhunk trip planned this summer too! (lots of plans...)

Best,
Matt
User avatar
chicagocat
admiral
admiral
Posts: 181
Joined: Tue Aug 03, 2004 2:39 pm
Location: Chicago (36052)

Re: New Owner - Bulb Part #'s

Post by chicagocat »

Matt,
Your anchor light fixture is likely to be an Aqua Signal like this one, but check using a camera:

https://www.defender.com/product3.jsp?p ... &id=827318

If you have a decent telephoto lens you can generally tell what it is from blowing up a camera shot (even a phone might do).

This 31mm LED bulb will fit that fixture:

https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1
PDQ 36052 - 1996 LRC - "Anne Z" - Chicago
and 2001 PDQ 36 Classic (Tall Rig)- "Cat Tales" - Punta Gorda, FL
Medicmatt
deckhand
deckhand
Posts: 17
Joined: Thu Oct 31, 2019 1:48 pm

Re: New Owner - Bulb Part #'s

Post by Medicmatt »

Thanks!

Just realized I can fly my drone up there to grab a photo.

Matt
User avatar
thinwater
admiral
admiral
Posts: 1110
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: New Owner - Bulb Part #'s

Post by thinwater »

Just a few thoughts.
* 15 hp. No you will not get more power and you will get less in reverse. The Yamaha 9.9 really is the right motor. I've used other motors and they just aren't as good.
* Solar is much more effective than engine charging when you have a big hardtop. You don't run enough engine hours to help much, but you can pack a lot of cells on the roof. Also consider adding a battery or upsizing.
* Binoculars are the time-honored way to look at the rigging and masthead. You will probably get a better view than with a drone, since the binoculars can be made quite stable by resting them on a piling a few slips down.

Really, you should go up the mast to inspect at least once per year. Not a big deal once you have the tools.
Writing full time since 2014.
"Rigging Modern Anchors,"Seaworthy Press, https://www.amazon.com/Rigging-Modern-A ... 1948494078
Book Store. http://sail-delmarva.blogspot.com/2017/ ... store.html
Johnsail
deckhand
deckhand
Posts: 13
Joined: Thu Apr 12, 2018 9:57 am

Re: New Owner - Bulb Part #'s

Post by Johnsail »

Welcome aboard Matt!

Can't help with your bulb #'s, but just wanted to say hello.

Always glad to meet another PDQ owner in New England!

You're gonna love her!
Johnsail
Brown-Eyed Girl III
PDQ 32+
Hull # 025
Dutch Harbor, Jamestown, RI
Iriemon
skipper
skipper
Posts: 79
Joined: Mon Apr 20, 2015 11:05 am

Re: New Owner - Bulb Part #'s

Post by Iriemon »

The original anchor light (I believe aqua signal) was damaged in a storm. I replaced it 18 months ago with a Pactel LED:

https://www.amazon.com/gp/product/B01KY ... UTF8&psc=1

I was skeptical, but I gotta say, it has been through some crappy wx and is going like a champ.
Post Reply