Exhaust Elbow

Post here if you want to discuss a topic specific to the PDQ Capella.
Post Reply
User avatar
phild
skipper
skipper
Posts: 85
Joined: Fri Jul 14, 2006 4:54 pm
Location: Marblehead, MA (36094)

Exhaust Elbow

Post by phild »

Anyone have any experience replacing a Yanmar exhaust elbow on a 2GM20FC? Any insight would be appreciated?

Thanks!
Phil and Mary DiDomenico
s/v Arabella
36094

"There is more to sailing than ropes and winches, cleats and bulging sails. There are faraway places and the everchanging light, and the silence, and a great peace at the bottom of your soul." - Mate
User avatar
SecondWind
admiral
admiral
Posts: 404
Joined: Sat May 08, 2004 8:57 am
Location: Punta Gorda, Fl (33950)
Contact:

Re: Exhaust Elbow

Post by SecondWind »

Have replaced several. Simply remove the hoses, unbolt the old one and put the new one in place. Good time for a new hose to the muffler too. If your problem is the too small hatch in the shower, I can't help you. We had ours enlarged so that I could reach over the engine.
Terry Green
s/v Second Wind
36040
Post Reply