Anyone have any experience replacing a Yanmar exhaust elbow on a 2GM20FC? Any insight would be appreciated?
Thanks!
Exhaust Elbow
Exhaust Elbow
Phil and Mary DiDomenico
s/v Arabella
36094
"There is more to sailing than ropes and winches, cleats and bulging sails. There are faraway places and the everchanging light, and the silence, and a great peace at the bottom of your soul." - Mate
s/v Arabella
36094
"There is more to sailing than ropes and winches, cleats and bulging sails. There are faraway places and the everchanging light, and the silence, and a great peace at the bottom of your soul." - Mate
- SecondWind
- admiral
- Posts: 404
- Joined: Sat May 08, 2004 8:57 am
- Location: Punta Gorda, Fl (33950)
- Contact:
Re: Exhaust Elbow
Have replaced several. Simply remove the hoses, unbolt the old one and put the new one in place. Good time for a new hose to the muffler too. If your problem is the too small hatch in the shower, I can't help you. We had ours enlarged so that I could reach over the engine.
Terry Green
s/v Second Wind
36040
s/v Second Wind
36040