PDQ OWNERS FORUM

Posted: **Sat Feb 22, 2014 8:48 am**

Does anyone know who makes this faucet that's in the galley of my 2001 36? It's a bit unusual because of the horizontal mounting, and I can't seem to find one on the web. Mine is leaking and I'd like to replace it.

Thanks

Posted: **Mon Feb 24, 2014 8:10 am**

: I just replaced mine a few months back with the Chrome version which was exactly like the original white. They told me the white had been
discontinued. Jim (Yacht Supply Depot $169)

Posted: **Thu Feb 27, 2014 8:56 am**

Thanks a lot, Jim. I took the faucet stem to Home Depot, and they don't have anything like it. I can save anyone the effort of coating the splines on the top. There are 18. Couldn't find any on the web. Anyway, Scandvik sells the stems for $26. But my faucet is pretty beat up, so the extra $ for a new one may be worth it. If you're on a long cruise and the other stem starts leaking, that's really gonna be a drag...

Anyway, thanks again Jim.

Posted: **Thu Feb 27, 2014 5:16 pm**

hi,

ours started leaking so i bought 2 from scanvik on closeout. i replaced original and within 2 weeks it started to leak. installed the other new one and it leaked right from the get go. i've had valves apart and can't see why they leak.

switched to a whale long spout. just had to slightly elongate the water feed holes. so far so good.

Posted: **Wed Mar 05, 2014 2:33 pm**

I just got the stem from Scandvik. The spline pattern doesn't fit. They must have changed them at some point. Pretty much ready to give up on this faucet.

Posted: **Wed Mar 05, 2014 10:23 pm**

Brendan,

This one was installed last year in July to replace the missing old one. The spread is about a half hole off in each direction. Be mindful of the thread and make sure you get the correct match. I think it was a Whale fitting with a British thread pattern. I'll take a pic of the inside cabinet if you want it. It is working fine every day. We live aboard.

http://www.westmarine.com/ambassador-ma ... 31_001_504

Joe Mc

: Six inch scale behind

: Fit is close to original.

Posted: **Wed Mar 05, 2014 10:32 pm**

Here is another similar model from Whale.

http://www.jamestowndistributors.com/us ... own+Faucet

This one might be an easier direct fit replacement due to the match with the 15mm Whale tubing on board.

Posted: **Thu Mar 06, 2014 8:08 am**

Thanks Joe,
That's a big help.

Posted: **Sat Mar 08, 2014 3:37 pm**

OK. I bought the Whale faucet that Joe linked to. Only 96 bucks at http://www.jmsonline.net/fold-down-fauc ... otcold.htm
I'd never used JMS before, but the price was right and they had it in stock.

The holes are maybe 1/4" too narrow on the PDQ, but a little drill work fixed that and the faucet trim covers the holes nicely. Nice faucet. Very happy.

Posted: **Sat Mar 08, 2014 7:56 pm**

Excellent! Glad you like it.

Posted: **Wed May 07, 2014 6:46 pm**

Just ordered a new one for 3697 they are made by Barka from Italy .I tried replacing the cartridge but it still leaked . 125.00 cdn

PDQ OWNERS FORUM

2001 36 Galley Faucet?

2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?

Re: 2001 36 Galley Faucet?