Engine Room Access

Post here if you want to discuss a topic specific to the PDQ Capella.
CatManMike
deckhand
deckhand
Posts: 11
Joined: Thu Jun 16, 2016 10:15 am

Engine Room Access

Postby CatManMike » Wed Nov 02, 2016 11:31 am

For a heavy weight old man like myself access to the engine room via the deck hatch is nearly impossible. After reading Terry Green's idea of adding access through the shower wall I decided to create an access panel that would hinge up and out-of-the-way to allow Quick and easy access to the diesel engine rooms. It only took us a couple of hours to cut out the panel, add the stainless steel piano hinge and some light plastic trim around the edges. We added a stainless loop near the bottom of the cut out to hold the panel up against the ceiling and out-of-the-way. We will never use the deck patch again except for light and ventilation. This was a much easier project than I anticipated and highly recommended for any LRC owners. Attached are the before and after shots.
Original Shower Wall.jpg
Original Shower wall
After cutout-hinge-and-trim.jpg
After cutout, hinge and trim
Complete Access.jpg
Looking at the engine
.

"Reverie" is one of the few LRCs with dual heads - so port and starboard look nearly identical.

Return to “PDQ Capella (PDQ 36) Forum”

Who is online

Users browsing this forum: No registered users and 4 guests