Page 1 of 1

Engine Room Access

Posted: Wed Nov 02, 2016 11:31 am
by CatManMike
For a heavy weight old man like myself access to the engine room via the deck hatch is nearly impossible. After reading Terry Green's idea of adding access through the shower wall I decided to create an access panel that would hinge up and out-of-the-way to allow Quick and easy access to the diesel engine rooms. It only took us a couple of hours to cut out the panel, add the stainless steel piano hinge and some light plastic trim around the edges. We added a stainless loop near the bottom of the cut out to hold the panel up against the ceiling and out-of-the-way. We will never use the deck patch again except for light and ventilation. This was a much easier project than I anticipated and highly recommended for any LRC owners. Attached are the before and after shots.
Original Shower wall
Original Shower wall
After cutout, hinge and trim
After cutout, hinge and trim
Looking at the engine
Looking at the engine
.

"Reverie" is one of the few LRCs with dual heads - so port and starboard look nearly identical.