Lexan Guard Over AC Rear Panel
-
- skipper
- Posts: 52
- Joined: Thu Jul 19, 2007 4:36 pm
Lexan Guard Over AC Rear Panel
Had some Lexan left over after redoing the wind screens.
Mark & Diana Doyle
Mark & Diana Doyle
Semi-Local
PDQ MV 34 Hull 88, formerly PDQ 36 Capella Hull 36090
******************
On the Water ChartGuides Cruising Guides & Electronic Charts
www.OnTheWaterChartGuides.com
Semi-Local
PDQ MV 34 Hull 88, formerly PDQ 36 Capella Hull 36090
******************
On the Water ChartGuides Cruising Guides & Electronic Charts
www.OnTheWaterChartGuides.com
-
- skipper
- Posts: 52
- Joined: Thu Jul 19, 2007 4:36 pm
Re: Lexan Guard Over AC Rear Panel
Got a couple off-list questions. Main one was the dimensions ... ooops! Sorry.
All made out of 3/16" Lexan (scraps from re-doing the windscreens).
Large piece is 5 x 8.25" and small piece is 1.5 x 8.25", cemented, then attached to back guard with two 3/4" quarter-twenties.
All made out of 3/16" Lexan (scraps from re-doing the windscreens).
Large piece is 5 x 8.25" and small piece is 1.5 x 8.25", cemented, then attached to back guard with two 3/4" quarter-twenties.
Mark & Diana Doyle
Semi-Local
PDQ MV 34 Hull 88, formerly PDQ 36 Capella Hull 36090
******************
On the Water ChartGuides Cruising Guides & Electronic Charts
www.OnTheWaterChartGuides.com
Semi-Local
PDQ MV 34 Hull 88, formerly PDQ 36 Capella Hull 36090
******************
On the Water ChartGuides Cruising Guides & Electronic Charts
www.OnTheWaterChartGuides.com