Hydraulic steering

Post here if you want to discuss a topic specific to the MV/32, MV/34, and MV/41.
island time
Posts: 10
Joined: Mon Jan 04, 2016 6:58 am
Location: Cape Coral, Fl.

Hydraulic steering

Postby island time » Sat Feb 17, 2018 10:10 am

I just replaced the starboard side hydraulic steering ram on my boat and am having trouble bleeding the system. Any help would be greatly appreciated.
Vinnie L 2002 PDQ Powercat 34 Hull #18

Posts: 635
Joined: Wed Jun 15, 2005 11:18 am
Location: ICW (32043)

Re: Hydraulic steering

Postby duetto » Sat Feb 17, 2018 4:53 pm


are you following the directions from seastar? what are the symptoms?

aside from following seastars directions, i've found that suspending a bottle of fluid to the upper helm and working the wheel to hard over until the relief valve opens will get a lot of air out. repeat in the other direction. after a few iterations of this let the system set and air bubbles will concentrate into big bubbles which are easier to get out.
john & diane cummings
duetto mv34 #23

Return to “PDQ Powercat Forum”

Who is online

Users browsing this forum: No registered users and 2 guests