DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Post here if you want to discuss a topic specific to the MV/32, MV/34, and MV/41.
jim
1st mate
1st mate
Posts: 41
Joined: Sat Nov 20, 2004 11:10 pm
Location: connecticut

DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby jim » Tue May 29, 2018 10:55 am

I've recently been unable to disengage the transmission at the lower helm to wash the turbo props at the lower helm. After pushing and pulling on the little knob of the starboard side of the lower helm shifter I am now unable to shift the gears on the starboard engine at the lower helm. The lower helm port engine seems to shift easily and the upper helm shifter works. Any suggestions? Thanks, Jim
mckdj12

deising
admiral
admiral
Posts: 170
Joined: Mon Sep 15, 2014 3:48 pm
Location: Punta Gorda, FL
Contact:

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby deising » Tue May 29, 2018 3:07 pm

Jim,

Our 2006 model does not have any knobs on the sides of the shifter. Perhaps if you tell us what year and hull number you have, someone can help you.
Duane Ising
m/v Diva Di
Punta Gorda, FL
2006 PDQ MV 34 - hull 91, 75HP, 3-blade

jim
1st mate
1st mate
Posts: 41
Joined: Sat Nov 20, 2004 11:10 pm
Location: connecticut

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby jim » Tue May 29, 2018 8:50 pm

I made a mistake. There is no knob. I pull the shifter starboard lever outward. This is the combined gear and accelerator for the starboard diesel at the inside helm. I can’t shift it or accelerate. The lower port engine allows me to shift and accelerate in gear. The shifter at the upper helm works fine for both engines. The boat is an mv34 2006 with the 100 diesels.
mckdj12

James Power
admiral
admiral
Posts: 217
Joined: Tue Apr 01, 2008 3:30 pm
Location: Georgian Bay

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby James Power » Tue May 29, 2018 11:17 pm

The upper helm is slaved off the lower helm. If upper works lower should follow suit. Is there upper helm canvas that is interfering with shifting?

James

deising
admiral
admiral
Posts: 170
Joined: Mon Sep 15, 2014 3:48 pm
Location: Punta Gorda, FL
Contact:

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby deising » Wed May 30, 2018 6:00 am

Jim,

You should be able to take the cover off the shifter, and you can see a lot from the bottom by opening the electrical panel door wide open. I have never had need to inspect mine, but that is the first thing I would do. See if you can find something obviously wrong and go from there.

Good luck!
Duane Ising
m/v Diva Di
Punta Gorda, FL
2006 PDQ MV 34 - hull 91, 75HP, 3-blade

jim
1st mate
1st mate
Posts: 41
Joined: Sat Nov 20, 2004 11:10 pm
Location: connecticut

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby jim » Wed May 30, 2018 9:32 am

I think it may be the canvas at the upper helm. I did remove the shifter cover and opened the wiring door and followed the cables to the transmission s and they all looked fine. I know I didn't remove the canvas over the upper helm the last time I tried. I don’t remember the previous times. I’ll double check. Thanks so much for the suggestions. Jim
mckdj12

jim
1st mate
1st mate
Posts: 41
Joined: Sat Nov 20, 2004 11:10 pm
Location: connecticut

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby jim » Wed May 30, 2018 11:07 am

Thanks again guys! You’re the best. I removed the helm canvas that covers the shifter and other instruments and the lower helm shifts like a hot blade through butter! Jim
mckdj12

jim
1st mate
1st mate
Posts: 41
Joined: Sat Nov 20, 2004 11:10 pm
Location: connecticut

Re: DISENGAGE TRANSMISSION AND CAN'T SHIFT STARBOARD SHIFTER AT THE LOWER HELM

Postby jim » Wed May 30, 2018 3:26 pm

I hope James and Duane received my last post thanking them. The problem was the upper helm canvas. Jim
mckdj12


Return to “PDQ Powercat Forum”

Who is online

Users browsing this forum: No registered users and 5 guests