Bridge cushion dimensions

Post here if you want to discuss a topic specific to the MV/32, MV/34, and MV/41.
Post Reply
John&Ria
admiral
admiral
Posts: 150
Joined: Mon Feb 13, 2012 2:07 am
Location: Vancouver BC (PDQ 34 hull 111)
Contact:

Bridge cushion dimensions

Post by John&Ria »

It appears one of our bridge cushions went astray (a mystery) during winterization this year. Probably a longshot, but would anyone have a dimensional diagram for the cushion that sits above the propane tank locker (i.e. adjacent to the helm seat, port side)? Also, does anyone know the brand of vinyl that was used for the original cushions? Much thanks for any assistance.
John&Ria
admiral
admiral
Posts: 150
Joined: Mon Feb 13, 2012 2:07 am
Location: Vancouver BC (PDQ 34 hull 111)
Contact:

Re: Bridge cushion dimensions

Post by John&Ria »

Problem resolved - over the weekend our wayward cushion was found at our marina and returned to us. Fortunately, after a good clean, it's still usable. No need for a replacement after all 8).
Post Reply