PDQ 36 port windows- gasket
PDQ 36 port windows- gasket
Does anyone know if/where we can buy a gasket/seal for the PDQ 36 portlights (the opening ones in the staterooms and bathroom? From my research it appears they were made by Bomar but unfortunately it appears that Bomar may not be supporting spares at this point?
I was thinking about cutting a piece of the gasket out and trying to match cross section shape if spares aren't available.
Thanks,
Doug and Nicole
Makala
I was thinking about cutting a piece of the gasket out and trying to match cross section shape if spares aren't available.
Thanks,
Doug and Nicole
Makala
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
I could not source it, I am going to try to make my own...
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
Re: PDQ 36 port windows- gasket
Ok, I will let you know if I am able to find a similar-to gasket material.
Thanks,
Doug
Thanks,
Doug
Re: PDQ 36 port windows- gasket
Hi Doug,
Just read your post, I believe I ordered some of that gasket from bomar a little while ago. It is either in my garage or on the boat if you want to look at the id # on the package to get some. Let me know.
Cheers,
Jordi
Just read your post, I believe I ordered some of that gasket from bomar a little while ago. It is either in my garage or on the boat if you want to look at the id # on the package to get some. Let me know.
Cheers,
Jordi
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
Yes, please Jordi. I ordered what I thought was the right gasket and now I have 4 gaskets that don't fit ![Sad :-(](./images/smilies/icon_sad.gif)
Sam
![Sad :-(](./images/smilies/icon_sad.gif)
Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
Re: PDQ 36 port windows- gasket
Hi Guys,
Here are a couple photos of the Bomar gasket that I used. Hope this helps.
Cheers,
Jordi
Here are a couple photos of the Bomar gasket that I used. Hope this helps.
Cheers,
Jordi
Re: PDQ 36 port windows- gasket
Are the cabin & head portlights the same for all the 36s or did it change at some point? What hull number or year is your boat Jordi?
Thanks
Thanks
James & Allison
36019 - Allie-May
Cocoa, FL
36019 - Allie-May
Cocoa, FL
Re: PDQ 36 port windows- gasket
We own Allez Cat, she is a 1991 PDQ 36 hull number 50. Don't know how long they kept those windows.
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
Jordi,
Allez Cat is hull #10...Hull #50 was not built until 1996![Smile :-)](./images/smilies/icon_smile.gif)
Sam
Allez Cat is hull #10...Hull #50 was not built until 1996
![Smile :-)](./images/smilies/icon_smile.gif)
Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
Re: PDQ 36 port windows- gasket
Hi Sam,
Thank you! I always get confused with the hull numbering system.
Cheers,
Jordi
Thank you! I always get confused with the hull numbering system.
Cheers,
Jordi
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
No worries Jordi, so do I ![Smile :-)](./images/smilies/icon_smile.gif)
FYI, I just bought some of this gasket from Bomar, it should be here next week, will tell you how it fits on hull #15![Smile :-)](./images/smilies/icon_smile.gif)
Sam
![Smile :-)](./images/smilies/icon_smile.gif)
FYI, I just bought some of this gasket from Bomar, it should be here next week, will tell you how it fits on hull #15
![Smile :-)](./images/smilies/icon_smile.gif)
Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
Re: PDQ 36 port windows- gasket
I look forward to your update Sam. I have hull 19 so if it fits your boat it should also fit mine. I have a couple leaky port lights that can use some attention.
James & Allison
36019 - Allie-May
Cocoa, FL
36019 - Allie-May
Cocoa, FL
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
No luck, way too big, wrong gasket. I emailed Bomar and sent some photos to see if I can get the right gasket. I have attached the same photos here if anyone can identify the port model number. Plastic trim inside, aluminum outside, rain shade is not part of the assembly, added later. Window is 15x5 inches.
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Re: PDQ 36 port windows- gasket
So...here is the reply from Bomar...
The gasket/ P3000-21 we sent you is for or 5,000/8,000 series line manufactured after the fall of 1994. If your existing ports were made prior to this year the replacement gasket should really be P3000-21-RETRO. The retro gasket is to take the place of the existing gasket we were using before the change made in the fall of 1994.
So I guess I needed to add "RETRO" to the end of the part number since we were built in 1991![Smile :-)](./images/smilies/icon_smile.gif)
So, I now have 13 ft of brand new P3000-21 for any of you who have boats built AFTER 1994. I paid $116 for it, make me an offer and I will send it to you so that it does not go to waste...
Sam
The gasket/ P3000-21 we sent you is for or 5,000/8,000 series line manufactured after the fall of 1994. If your existing ports were made prior to this year the replacement gasket should really be P3000-21-RETRO. The retro gasket is to take the place of the existing gasket we were using before the change made in the fall of 1994.
So I guess I needed to add "RETRO" to the end of the part number since we were built in 1991
![Smile :-)](./images/smilies/icon_smile.gif)
So, I now have 13 ft of brand new P3000-21 for any of you who have boats built AFTER 1994. I paid $116 for it, make me an offer and I will send it to you so that it does not go to waste...
Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL
Re: PDQ 36 port windows- gasket
I have the Bomar 5000 series port/light/window as mentioned in the post of 2017. Bomar is no longer supporting this window. Do any of you know the source of the gasket. I mean Bomar was using an off-the-shelf gasket but whose? -mike 2001 Sailing PDQ Antares