netting openings

PDQ issues applicable across all PDQ Yachts (or if you can't find a place for something, it probably belongs here for now)
panchito
deckhand
deckhand
Posts: 4
Joined: Mon Jan 29, 2018 12:22 pm

netting openings

Postby panchito » Fri Jun 01, 2018 10:30 am

I have a 1989 PDQ 36 and was hoping someone has the opening measurements for the nettings. I left my boat in Mexico and forgot to measure for the nets before returning to the states. Thanks, Frank

User avatar
thinwater
admiral
admiral
Posts: 1048
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: netting openings

Postby thinwater » Fri Jun 01, 2018 11:01 am

Looks like 1/4-inch or just a wee hair less. Probably nominal 1/-inch.

(That's 1/4" chain and 1/2" rope)
Image

panchito
deckhand
deckhand
Posts: 4
Joined: Mon Jan 29, 2018 12:22 pm

Re: netting openings

Postby panchito » Sun Jun 03, 2018 11:18 am

Thanks for the reply with the photo. Actually, I was hoping for the dimensions of the openings that the nets fit into. Cheers.

User avatar
thinwater
admiral
admiral
Posts: 1048
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: netting openings

Postby thinwater » Sun Jun 03, 2018 6:51 pm

Sold the boat, don't have that.

User avatar
Lady of the Lake
Site Admin
Posts: 622
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: netting openings

Postby Lady of the Lake » Mon Jun 04, 2018 9:42 am

Call Sunrise Yacht Products, that is where many of us get ours made, they have done many PDQs so they already have the dimensions. There are a few different trampoline configurations so you are taking a chance not getting actual measurements for your boat. If you have a hull made in 1989, then you have the hard center section that separates the two trampoline pieces, there were not a lot of those made so Sunrise may not have made one of those, but if they have, they will know, newer hulls laced together in the center, yours will have a different attachment method. I would recommend having someone run down to your boat for actual measurements after talking to Sunrise, they will tell you exactly what dimensions they need. There must be someone close to the boat that you can pay a few bucks to run by and make the measurements to save you the risk of these not fitting perfectly. Here is there number:

Sunrise Yacht Products
6544 44th St N #1205, Pinellas Park, FL 33781
(727) 526-9288
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL

panchito
deckhand
deckhand
Posts: 4
Joined: Mon Jan 29, 2018 12:22 pm

Re: netting openings

Postby panchito » Mon Jun 04, 2018 2:56 pm

Thanks for the ideas.


Return to “PDQ General Forum”

Who is online

Users browsing this forum: No registered users and 1 guest