Yamaha 9.9 fix
Posted by Dan Hofmann on April 08, 2004 at 06:24:00:
Looking for a fix for the following problem.
You clean and adjust the carb, ( the one with the crank case fumes flowing into the carb intake horn) it is running fine.
You putter around for a couple of weeks and everything is great. Take it on a 5-8 hour run some where and when you pull in it
will not idle. If you adjust the idle screw, you have to run it up realy high.
Thanks
Follow Ups:
Re: Yamaha 9.9 fix Marc Gershel 10:53:45 04/08/04 (0)
Posted by Marc Gershel on April 08, 2004 at 10:53:00:
In Reply to: Yamaha 9.9 fix posted by Dan Hofmann on April 08, 2004 at 06:24:00:
Hi. Had a similar problem and traced it to the linkage. It seemed the spring,on the carb,. that pulls everything back to
idle, wasn't pulling it back enough. I sprayed it with WD-40 while working it back and forth and it seems to have done the
trick, so far.
Marc