window leak

Discussions regarding electronics, gear and other equipment of maintenance issues that ARE NOT SPECIFIC to a certain PDQ model yacht
Post Reply
Old PDQ Message Board
Site Admin
Posts: 522
Joined: Sun Apr 25, 2004 11:08 pm

window leak

Post by Old PDQ Message Board » Mon Apr 26, 2004 7:28 am

window leak

Posted by Nando Iannarelli on January 27, 2004 at 15:08:00:

Does anyone have any experience with addressing a leaking wrap around salon
window? PDQ 36.

Follow Ups:

Re: window leak Lee Henderson 15:40:49 01/31/04 (0)
Re: window leak Dan White 02:58:20 01/28/04 (0)

--------
Re: window leak

Posted by Lee Henderson on January 31, 2004 at 15:40:00:
In Reply to: window leak posted by Nando Iannarelli on January 27, 2004 at
15:08:00:


There are a couple articles in the POA Newsletter - Fall 2003 on PDQ Window
repair. You night take a look at them. I replaced all my windows about 5 years
ago myself and have had no leaks ever since. Trick #1 is to use Automotive
Window calking. That's the same stuf they use to instal a window on your car

Trick #2 is not to screw the windows down tight. Screw them down so the calking
seeps out but stop when you have a quarter to an eight inch distance between the
window and the fiberglass. Then let the calking set up. Trick #3 is not to use
countersinked screws. This sets up a weak point at the screw. Use a flat head
screw with a small washer, all stainless. With this approach you will not have
any problems.

Rauschabout
deckhand
deckhand
Posts: 1
Joined: Mon Dec 04, 2017 5:59 pm

Re: window leak

Post by Rauschabout » Sun Apr 07, 2019 9:41 am

Hello. Here it is 2019 and we are needing to seal salon windows. We saw your post, do you still recommend that process? Thank you.

PDQ 36 Hull 98
Sure & Y-Knot
Captain Earl

User avatar
chicagocat
admiral
admiral
Posts: 177
Joined: Tue Aug 03, 2004 2:39 pm
Location: Chicago (36052)

Re: window leak

Post by chicagocat » Wed Jun 26, 2019 2:42 pm

Earl,
Are you thinking about actually having new windows fabricated? There's an acrylic and plastics shop here in Chicago that says that if I get them the window, they can reproduce it. I have a couple cracked windows that I was thinking about taking to them.
While I'm waiting, I'd have to do the "poor man's car window thing" with Hefty bags and tape, which I hate, but it seems unavoidable.

Thoughts anyone?
PDQ 36052 - 1996 LRC - "Anne Z" - Chicago
and 2001 PDQ 36 Classic (Tall Rig)- "Cat Tales" - Punta Gorda, FL

User avatar
SecondWind
admiral
admiral
Posts: 402
Joined: Sat May 08, 2004 8:57 am
Location: Punta Gorda, Fl (33950)
Contact:

Re: window leak

Post by SecondWind » Thu Jun 27, 2019 6:03 am

B, Try some flowable silicone for a temporary repair.
Terry Green
s/v Second Wind
36040

Post Reply