Lewmar Hatches
-
- 1st mate
- Posts: 40
- Joined: Mon Jun 04, 2007 7:05 pm
- Location: West Creek, New Jersey (34002)
- Contact:
Lewmar Hatches
My Lewmar hatches can only be closed or fully opened. I've been talking to Lewmar about repairing them, but am having difficulty in determining the model (trimline, rollstop, etc.?). Sunshine is PDQ 34002. Anybody have any idea which hatehes PDQ used in the early models? Thanks for your help!
Bill and Anna Marie
S/V "Sunshine" PDQ 34002
West Creek, NJ
S/V "Sunshine" PDQ 34002
West Creek, NJ
If I remember correctly, I think they will be Rollstop, as the boat was built in 89. Check the height above deck in mm. Then measure the outside dimensions in mm and compare the different sizes under the models
http://www.lewmar.com/webspares/index.aspx?prod=hatch
http://www.lewmar.com/webspares/index.aspx?prod=hatch
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact:
Allezcat 36010 (1991) has Lewmar rollstop ocean hatches. I bought the boat in 1993 and had trouble with the hatches not staying open. Lewmar provided me free hinge kits for all the hatches (size 30 and 50). Although difficult to replace they have performed fairly well since then but are now starting to flop closed again. Perhaps there is some add-on hold-open adjustable bar we could install?
Chet
Chet
- Lady of the Lake
- Site Admin
- Posts: 626
- Joined: Wed Dec 22, 2004 1:37 pm
- Location: Punta Gorda, FL (36015)
- Contact: