Windlass - Simpson Lawrence Sprint 1000

Discussions regarding electronics, gear and other equipment of maintenance issues that ARE NOT SPECIFIC to a certain PDQ model yacht
Post Reply
User avatar
Cat Tales
admiral
admiral
Posts: 257
Joined: Tue Sep 06, 2005 7:20 pm
Location: Boynton Beach, FL (36081)
Contact:

Windlass - Simpson Lawrence Sprint 1000

Post by Cat Tales »

For those of you with a SL Sprint 1000 windlass, does anyone use HT or G4 chain. We currently have BBB chain on the windlass, but we'd like to switch to HT and I can't confirm if the Sprint 1000 will accept HT chain.


Thanks,
Chris
Chris & Kelly Haretos
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
Loki
skipper
skipper
Posts: 79
Joined: Tue May 18, 2004 10:23 pm
Location: Boston, MA (36072)
Contact:

Re: Windlass - Simpson Lawrence Sprint 1000

Post by Loki »

I have a Sprint 1000 and use Acco G4, spliced to NE Rope 9/16 3-strand nylon. This was the combo the gypsy was designed for. I'm surprised that yours works with BBB, since I thought that had a shorter link. It is possible that you have a different gypsy, or that my memory is faulty. My "parts notes" shows a number for the windlass of: SL00610016PK - perhaps yours is a different version.
Jeff Morris, Loki 36072
User avatar
Cat Tales
admiral
admiral
Posts: 257
Joined: Tue Sep 06, 2005 7:20 pm
Location: Boynton Beach, FL (36081)
Contact:

Re: Windlass - Simpson Lawrence Sprint 1000

Post by Cat Tales »

I have found two different bits of info from Simpson Lawrence. My manual states HT or BBB but the windlass descriptions I have seen only state HT, hence the question. Although I don't have my serial number handy, the original (installed 2000) windlass was replaced two years ago with a brand new one (2006). The chain has not been replaced since commissioning so I can only assume that HT or BBB will work on all models from 2000-2006. When I purchase & replace with HT I'll let you know if it doesn't work.

Does anyone have an inexpensive source for G4/HT chain? I found one on Ebay for $2.50 a foot, but can't trust that the chain has actually been tested or certified G4.

Thanks,
Chris
Chris & Kelly Haretos
Formally of s/v Cat Tales, 36081
Boynton Beach, FL
Allezcat
admiral
admiral
Posts: 272
Joined: Fri May 07, 2004 9:29 pm
Location: Punta Gorda, Fl 33955

Re: Windlass - Simpson Lawrence Sprint 1000

Post by Allezcat »

I bought 5/16" G4HT from Defender for my Sprint 1000.

Chet
Allezcat 36010
Loki
skipper
skipper
Posts: 79
Joined: Tue May 18, 2004 10:23 pm
Location: Boston, MA (36072)
Contact:

Re: Windlass - Simpson Lawrence Sprint 1000

Post by Loki »

I was just at the boat and looked up what the manual says and thought I'd put it in here for posterity.

There is a table for Gypsy 608RC60 - I assume the "8RC" means 8mm, Rope/Chain - which lists 5 types of chain.
The "P" dimension is the width of the "hole" in the chain, "D" is the thickness:
P D
S-L 0058003 24.0mm 8mm
S-L 0058003 stainless 24.0mm 8mm
ACCO Proof 25.4mm 1/4"
ACCO High Test 26.2mm 5/16"
ACCO BBB 25.4mm 5/16"

Elsewhere I found mention of a different gypsy, listed as 6010C50, which is chain only for German Din 766 10mm chain.
Jeff Morris, Loki 36072
Post Reply