Spare 9.9 HP Yamaha High Thust Props

Use this forum to list items you have for sale or items you want to buy.
User avatar
thinwater
admiral
admiral
Posts: 1050
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Spare 9.9 HP Yamaha High Thust Props

Postby thinwater » Mon Aug 27, 2018 6:38 pm

I got these with some used engines some years ago and I'm cleaning out the workroom. Gotta make room for projects and Corsair stuff.

They are used but functional. In my opinion every PDQ owner should carry a spare or two. Just ask how many have wound up a rope in a prop,spinning a prop. It's a 5-minute swap... if you have a spare. They are $70 on e-bay. How about $50 for all three, plus shipping... unless you want to pick them up. (Deale MD or Vienna, VA).


Image
Image

User avatar
Lady of the Lake
Site Admin
Posts: 622
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: Spare 9.9 HP Yamaha High Thust Props

Postby Lady of the Lake » Mon Sep 03, 2018 10:04 pm

Please specify diameter and pitch of each, I believe they are different throughout the years, the ones I have on my 2013 9.9s are different than the ones on my old 2006 motors. Both are Yamaha High Thrust 9.9s but I believe the torque is different on the ones based on the smaller blocks.

Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL

User avatar
thinwater
admiral
admiral
Posts: 1050
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: Spare 9.9 HP Yamaha High Thust Props

Postby thinwater » Tue Sep 04, 2018 10:51 am

11.5-inch diameter. I would be guessing at the pitch.

They are older, probably about 1997-2000.

As a spare it won't matter too much. I used these with 2012 engines and can't say that I noticed any difference.
Last edited by thinwater on Tue Sep 04, 2018 12:19 pm, edited 1 time in total.

User avatar
Lady of the Lake
Site Admin
Posts: 622
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: Spare 9.9 HP Yamaha High Thust Props

Postby Lady of the Lake » Tue Sep 04, 2018 10:57 am

Pitch is embossed along one of the blade edges. I bet you are right, should be fine as spares :-)
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL

User avatar
thinwater
admiral
admiral
Posts: 1050
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: Spare 9.9 HP Yamaha High Thust Props

Postby thinwater » Thu Sep 06, 2018 1:33 pm

I think the pitch says "9 1/4", but it is difficult to read. They are all the same.

User avatar
Lady of the Lake
Site Admin
Posts: 622
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: Spare 9.9 HP Yamaha High Thust Props

Postby Lady of the Lake » Fri Sep 07, 2018 6:56 pm

That sounds right :-) Let me see what mine are, I have both...
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL


Return to “Classifieds”

Who is online

Users browsing this forum: No registered users and 4 guests