Just got into the PDQ family .. 1997 32 footer - so far delighted - however on my list of things to do unfortunately is replace are the outboards. I may be speaking heresy - but has anyone tried using a 20" shaft? Or is that just not even an option with prop not submersed enough.. 25" very tough to find/get.
Thanks!
Pierre
Anyone tried 20" shafts?
- Latis (32028)
- 1st mate
- Posts: 27
- Joined: Sun Mar 13, 2005 10:10 am
- Location: Reedville, VA (32028)
-
- admiral
- Posts: 169
- Joined: Fri May 07, 2004 2:23 pm
- Location: Ontario (32043)
stay with 25
I don't believe 20 inch would do the job. Keep in mind that the surface of the water is not flat when you are underway. If the prop breaks the surface at all you will have a screaming engine.
Get in touch with PDQ - they can tell you where to go for replacements.
Get in touch with PDQ - they can tell you where to go for replacements.
-
- admiral
- Posts: 169
- Joined: Fri May 07, 2004 2:23 pm
- Location: Ontario (32043)
consider 8 hp
You might also consider the Yamaha 8 HP. There is a thread on the forum at http://www.themultihull.com on engines for catamarans. It seems the T8 is essentially the old 9.9 and it is available with the 25 inch shaft.
- Latis (32028)
- 1st mate
- Posts: 27
- Joined: Sun Mar 13, 2005 10:10 am
- Location: Reedville, VA (32028)