Salon hatch inner trim piece.

Post here if you want to discuss a topic specific to the PDQ Altair.
amytom
admiral
admiral
Posts: 684
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Salon hatch inner trim piece.

Postby amytom » Sun Aug 06, 2017 4:15 pm

Anyone have a source for the salon hatch inside trim piece?
Attachments
image1.JPG

amytom
admiral
admiral
Posts: 684
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Re: Salon hatch inner trim piece.

Postby amytom » Wed Aug 09, 2017 9:33 am

Nobody knows where to get these?

What are the chances of repair? The plastic is dried out and cracking. I'm fairly good with FRP but plastic repair would be a new skill to learn.

Any thoughts?

Iriemon
skipper
skipper
Posts: 59
Joined: Mon Apr 20, 2015 11:05 am

Re: Salon hatch inner trim piece.

Postby Iriemon » Thu Aug 10, 2017 8:46 am

I assume you've checked with Bomar?

If there is no source for these, the best alternative might be to make a frame out of teak.

User avatar
Lady of the Lake
Site Admin
Posts: 615
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: Salon hatch inner trim piece.

Postby Lady of the Lake » Thu Aug 10, 2017 9:34 am

Tom, send me the measurements and let me see if I have an extra one in my parts stash :-)
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL

User avatar
thinwater
admiral
admiral
Posts: 1027
Joined: Mon Sep 22, 2008 8:08 am
Contact:

Re: Salon hatch inner trim piece.

Postby thinwater » Thu Aug 10, 2017 10:08 am

... If there is no source, the simplest, most OEM-like solution would be to pop a female mold from a bad one and make several. Faster and more appropriate to the look of the boat than teak IMHO. Cheaper too.

I might add a little flare to the outside to get them out of the mold easier. Sand the old one smooth and wax at least 3 coats to get rid of as much texture as possible.
Writing full time since 2014.

http://sail-delmarva.blogspot.com/2017/ ... store.html
"Keeping a Cruising Boat for Peanuts"
"Singlehanded Sailing for the Coastal Sailor"
"Faster Cruising for the Coastal Sailor"

Nautica
deckhand
deckhand
Posts: 1
Joined: Wed Jan 11, 2017 9:07 am

Re: Salon hatch inner trim piece.

Postby Nautica » Thu Aug 10, 2017 1:24 pm

Bought mine here:

Paid about $60/ea as I recall. Be careful to get the correct depth. I also recall having to wait about 4 weeks for delivery.

Good Luck.

Pompanette LLC.

P.O. Box 1200
Charlestown, NH, USA 03603

T: (603) 826-5791
F: (603) 826-4125
http://pompanettellc.com/bomar/

Lastly, maybe check with Defender.com as they have a sizable inventory and maybe (often) less expensive.

(Here's a start: Double check with your specific hatch model number) : http://www.defender.com/product.jsp?pat ... &id=109949

amytom
admiral
admiral
Posts: 684
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Re: Salon hatch inner trim piece.

Postby amytom » Sun Aug 13, 2017 3:56 pm

I've contacted Bomar waiting on a reply. Hopefully they will be able to help out.

The trim pieces are 16 1/2 x 16 3/8 inside and 19 3/8 x 19 5/16.

Sam if you have any laying around that would be great.

User avatar
Lady of the Lake
Site Admin
Posts: 615
Joined: Wed Dec 22, 2004 2:37 pm
Location: Punta Gorda, FL (36015)
Contact:

Re: Salon hatch inner trim piece.

Postby Lady of the Lake » Mon Aug 14, 2017 7:49 am

Sorry Tom looks like all exterior pieces, no interior trim :-(

Sam
Sam and Gina Densler
s/v Lady of the Lake
PDQ36 Hull #15
Punta Gorda, FL

amytom
admiral
admiral
Posts: 684
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Re: Salon hatch inner trim piece.

Postby amytom » Tue Aug 15, 2017 8:47 am

Thanks anyways Sam.

Bomar got back with me.
Looks like the hatches are model# N1070-10A
And the trim ring is model # NT2070-OFF-W assumming it only goes one inch up to meet the hatch. They have a different one for taller set ups.

Of course, this is the one measurement I didn't make while on board. Oh well, will measure when I get back in town then order.

Thx.

amytom
admiral
admiral
Posts: 684
Joined: Fri Oct 05, 2007 10:57 am
Location: Orlando, FL S/V DogHouse PDQ32009

Re: Salon hatch inner trim piece.

Postby amytom » Tue Jan 02, 2018 12:11 pm

Just an update on this. The standard off-white model isn't tall enough. The part number to order is NT2070-2.25-W. That is 2 1/4 inches tall but is straight white, close enough.
Careful on pricing though; I was quoted $58.00 each plus s/h. They shipped in two boxes and charged me another $53.74 + tax for the shipping.


Looks good though.

Iriemon
skipper
skipper
Posts: 59
Joined: Mon Apr 20, 2015 11:05 am

Re: Salon hatch inner trim piece.

Postby Iriemon » Tue Jan 16, 2018 1:28 pm

Thanks for posting that Tom, that is useful information. My trim rings are showing cracks and signs of age and I may be replacing them soon.


Return to “PDQ Altair (PDQ 32) Forum”

Who is online

Users browsing this forum: No registered users and 2 guests