Hi, I've noticed on some PDQs, what appears to be, a vinyl or rubber edge guard on the outer edge of the transom step. Was that a factory option, or can that be purchased anywhere? I tried searching for it without any luck. My edges have taken a beating over the years.
Thanks, Marc
Transom edge guard
-
- admiral
- Posts: 204
- Joined: Sat May 08, 2004 1:58 am
- Location: Philadelphia.Pa 36021
-
- admiral
- Posts: 169
- Joined: Fri May 07, 2004 2:23 pm
- Location: Ontario (32043)
Re: Transom edge guard
You may find it at www.spaenaur.com
-
- admiral
- Posts: 204
- Joined: Sat May 08, 2004 1:58 am
- Location: Philadelphia.Pa 36021
Re: Transom edge guard
Thanks for the suggestion, but no luck.
Marc
Marc
doubledutch wrote:You may find it at http://www.spaenaur.com
-
- 1st mate
- Posts: 48
- Joined: Wed Jan 02, 2008 12:26 pm
Re: Transom edge guard
The transom edge guard for the 36 was molded out of fiberglass and gel-coated, then attached to the transoms with marine adhesive.
-
- admiral
- Posts: 204
- Joined: Sat May 08, 2004 1:58 am
- Location: Philadelphia.Pa 36021
Re: Transom edge guard
OOOooohhh, That 'splains why I can't find it. Have to try a Plan B now.
Thanks, Marc
Thanks, Marc
-
- admiral
- Posts: 287
- Joined: Tue Apr 01, 2008 3:30 pm
- Location: Georgian Bay
Re: Transom edge guard
PDQ used moulded fiberglass trim made in house on the 36, and a flexable vinyl trim on the 32's, 34's and 44's. There are a few people looking for the vinyl trim, so I will see if I can find the supplier.
James
James
-
- admiral
- Posts: 204
- Joined: Sat May 08, 2004 1:58 am
- Location: Philadelphia.Pa 36021
Re: Transom edge guard
Thanks James.