On Gadzooks! the valve which admits water to the toilet is a problem. It opens insufficiently or not at all. Same with both "flush" and "fill". The unit is ITT 370450092, sold by Jabsco, I believe. I replaced the whole assembly with no improvement. I have opened it up, lubricated, experimented with different internal spring strengths, checked voltage, all with no favorable results.
Anyone with similar problem, solved or not?
Solenoid toilet valve
Solenoid toilet valve
Mebs and Wally Gilliam
Gadzooks! MV34 #33
Gadzooks! MV34 #33
-
- admiral
- Posts: 286
- Joined: Tue Apr 01, 2008 3:30 pm
- Location: Georgian Bay
Re: Solenoid toilet valve
Hey Gadzooks!,
Is it possible that the solenoid you have is for a 24 or 36 volt system, as they make these along with 12 volt units. I have had sucess with Jabsco solenoid model # 37038-1012.
Hope this helps
James
Is it possible that the solenoid you have is for a 24 or 36 volt system, as they make these along with 12 volt units. I have had sucess with Jabsco solenoid model # 37038-1012.
Hope this helps
James