Bow roller quick release pin
Bow roller quick release pin
Does anyone know where I can buy a couple of Stainless Steel quick release pins for securing our anchor in the bow roller? I found what I think is the correct pin. It's model "QRP 5.0" (5" useable length between the ring and the ball) made by Kingston Anchors Marine in Ontario. I have not yet found a Kingston dealer that can supply this exact pin or a similar size pin by any other brand. (see: https://kingstonanchors.com/collections ... lease-pins)
Mac Carter
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
Re: Bow roller quick release pin
hi mac,
is this it? if so, it's backordered. call they maybe able to give you an eta.
https://www.defender.com/product.jsp?path=-1&id=7881437
is this it? if so, it's backordered. call they maybe able to give you an eta.
https://www.defender.com/product.jsp?path=-1&id=7881437
john & diane cummings
duetto mv34 #23
duetto mv34 #23
Re: Bow roller quick release pin
That may be IT, John. Good find! I looked at Defender and did not see this there. I’ll double check at Defender on how they are measuring the length. I also found another source this evening for $4.50 ea.
Mac Carter
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
Re: Bow roller quick release pin
Found it at McMaster-Carr.com -- ordered two at $7.42 each. This is a BIG hardware company with good customer service.
https://www.mcmaster.com/pins/head-type ... k-release/
https://www.mcmaster.com/pins/head-type ... k-release/
Mac Carter
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
2006 34' PDQ PowerCat "All Heart"; MV 98; twin 100 HP Yanmars
Home Port: Bellingham WA 98229
Re: Bow roller quick release pin
Thanks Mac and John ! ... I've been looking for this.
Mike Hendry
M/V Easy Riders, Gulfport FL
2003 PDQ MV 34
The Legendary Hull #29
75 HP, 3 Blade
M/V Easy Riders, Gulfport FL
2003 PDQ MV 34
The Legendary Hull #29
75 HP, 3 Blade
Re: Bow roller quick release pin
I may be a bit late, but another consideration on these “quick release” anchor pins … they aren’t if you ever mess-up like I did last month! When preparing to anchor, not only did I forget to pull the pin, I somehow touched the windlass in the wrong direction for a second which instantly bent the pin. It took over 5 minutes with a hammer & screwdriver to bang it out. In some situations, it could have been a big problem.
I’ve now gone back to using a piece of line instead.
I’ve now gone back to using a piece of line instead.